Main functions of 303E-3-SK busbar processing machine:

Cutting, punching, bending (vertical bending, flat bending, u bending, offset bending),  twisting chamfering, embossing (various circular holes, square holes, special-shaped holes, and groove shapes), and other processing of copper and aluminum busbars.

Simple operation, convenient use, and high production efficiency are specially used for the power industry, high and low voltage complete sets, and busbar industry processing copper and aluminum busbar special equipment.

The main features of the busbar processing machine:

1. The machine has three processing units of punching, cutting, and bending, which can respectively carry out the punching, cutting, and bending processing of the bus bar. You can also choose the special processing of flattening, embossing, pressing cable joints, buttons, and so on.
2. The machine adopts the double-layer workbench design scheme, three stations can work at the same time without affecting each other, is easy to use, and production efficiency is obviously higher than the traditional busbar processing equipment.
3. The working stroke of each unit can be conveniently adjusted to reduce processing auxiliary time and improve production efficiency.
4.  Punching and shearing unit with vertical processing, flexible and convenient operation, shear using flat shear or punching shear, shear workpiece flat.
5.  The bending unit is horizontal, and the bending of flat and vertical bending can be achieved by replacing the mold. The bending unit of the CNC busbar processing machine adopts numerical control mode and has a memory function.
6. Through the replacement of the mold can also achieve a variety of processing functions, such as embossing, flattening, pressing cable joints and button twists, etc.
7. The punching unit of the turret busbar processing machine adopts the turret structure, which can assemble 4/6/8 sets of punching dies at one time. Can choose the appropriate punching mold to work, a simple operation.

Main features of our dgwmx303E-3-SK busbar processing machine:

• The cutting unit adopts a double-column shear structure (patent number: ZL201120262802.1), Cut mouth flat, no burr, and no waste.
• The punching unit adopts Nodular cast iron,4/6/8 modes position turret punching structure which is a total whole one, improving the concentric degree of molds,

prolonging the service life of the molds, saving time for a change.

• The bending unit adopts an open bending structure, making it easy to operate.
• The bending unit adopts a double work table, achieving a real sense of the three positions working at the same time while working without impacting each other.
• Adopting PLC controlled, the bending angle can be CNC controlled and with a storage function.
• Three units of the machine can work at the same time, not affecting each other, Improving the processing efficiency.
• Hydraulic tank with thick plate welding, and is treated by phosphating, making hydraulic oil can be long time used and will not degenerate.